Class EpdIF
EpdIf Class
Description
A class used to control the electronic paper display internal
functions.
Members
Public Constructors |
A public constructor should not be used as this class is intended to
be a singleton class. Access member functions using the object
instance named EpdIf. |
Public Methods |
|
EpdIf::EPD_Dis_Part |
Put an image buffer to the frame
memory, but not updating the
display |
EpdIf::EPD_SetFrame |
Put display data to the frame
memory, usually used for setup
text display functions |
EpdIf::EPD_SetRAMValue_BaseMap |
To read image data stored in the
RAM, but not display on the screen |
EpdIf::EPD_SetFrameMemory |
To read image data stored in the
buffer, but not display on the
screen |
EpdIf::EPD_UpdateDisplay |
Update the display |
EpdIf::EPD_ClearScreen_White |
Clear the frame memory with the
White color, but not updating the
display |
EpdIf::EPD_ClearScreen_Black |
Clear the frame memory with the
Black color, but not updating the
display |
EpdIf::EPD_Busy |
Wait until the Busy pin goes to
low, which is the idle state |
EpdIf::EPD_Reset |
Used for the Epaper module reset.
Often used to awaken the module in
deep sleep |
EpdIf::EPD_Sleep |
After this command is transmitted,
the chip would enter the
deep-sleep mode to save power |
EpdIf:: EPD_Dis_Part
Description
Put an image buffer to the frame memory, but not updating the display.
Syntax
void EPD_Dis_Part(unsigned int x_start, unsigned int y_start, const
unsigned char* datas, unsigned int PART_COLUMN, unsigned int
PART_LINE);
Parameters
x_start: starting position of the x-axis
y_start: starting position of the y-axis
datas: data to be displayed on the e-paper module
PART_COLUMN: height of the display area
PART_LINE: width of the display area
Returns
The function returns nothing.
EpdIf:: EPD_SetFrame
Description
Put display data to the frame memory, usually used for setup text
display functions.
Syntax
void EPD_SetFrame(const unsigned char* image_buffer, int x, int y,
int image_width, int image_height);
Parameters
image_buffer: the buffer which stores the data to be displayed on the
e-paper module, usually used to display texts.
x: starting position of the x-axis
y: starting position of the y-axis
image_width: width of the display area
image_height: height of the display area
Returns
The function returns nothing.
EpdIf:: EPD_SetRAMValue_BaseMap
Description
To read image data stored in the RAM, but not display on the screen.
Syntax
void EPD_SetRAMValue_BaseMap(const unsigned char* datas);
Parameters
datas: contains the black and white information that forms the image
stored in RAM
Returns
The function returns nothing.
EpdIf:: EPD_SetFrameMemory
Description
To read image data stored in the buffer but not display on the screen.
Syntax
void EPD_SetFrameMemory(const unsigned char* image_buffer);
Parameters
image_buffer: the buffer where stores the image data in hexadecimal
numbers
Returns
The function returns nothing.
EpdIf:: EPD_UpdateDisplay
Description
Update the ePaper display module. Always combined used with functions
set the frames.
Syntax
void EPD_UpdateDisplay(void);
Parameters
The function requires no input parameter.
Returns
The function returns nothing.
Notes and Warnings
There are 2 memory areas embedded in the e-paper display but once this
function is called, then the next action of SetFrameMemory or
ClearScreen will set the other memory area.
EpdIf:: EPD_ClearScreen_White
Description
Clear the frame memory with the White color.
Syntax
void EpdIf::EPD_ClearScreen_White(void);
Parameters
The function requires no input parameter.
Returns
The function returns nothing.
Notes and Warnings
If the users want to see the actual display on the e-paper screen, the
function EPD_UpdateDisplay() is required to be added behind this code.
EpdIf:: EPD_ClearScreen_Black
Description
Clear the frame memory with the Black color.
Syntax
void EpdIf::EPD_ClearScreen_Black(void);
Parameters
The function requires no input parameter.
Returns
The function returns nothing.
Notes and Warnings
If the users want to see the actual display on the e-paper screen, the
function EPD_UpdateDisplay() is required to be added behind this code.
EpdIf:: EPD_Busy
Description
Wait until the busy_pin goes to low, which is the idle state.
Syntax
void EpdIf::EPD_Busy(void);
Parameters
The function requires no input parameter.
Returns
The function returns nothing.
Notes and Warnings
If the users want to see the actual display on the e-paper screen, the
function EPD_UpdateDisplay() is required to be added behind this code.
EpdIf:: EPD_Reset
Description
This command will let the E-paper module reset, it is often used to
awaken the module in while it’s in the deep sleep mode, you will find
more details in the function EpdIf:: EPD_Sleep().
Syntax
void EpdIf::EPD_Reset(void);
Parameters
The function requires no input parameter.
Returns
The function returns nothing.
EpdIf::EPD_Sleep
Description
After this command is transmitted, the chip would enter the deep-sleep
mode to save power. The deep sleep mode would return to standby by
hardware reset. You can use EPD:: Init() to awaken the E-paper module.
Syntax
void EpdIf::EPD_Sleep(void);
Parameters
The function requires no input parameter.
Returns
The function returns nothing.