Class WS2812B
Description
Defines a class to use WS2812B LED with AmebaD.
Syntax
class WS2812B
Members
Public Constructors
WS2812B::WS2812B |
Constructs a WS2812B object |
Public Methods
WS2812B::begin |
Check for correct pin settings and prepare to drive the WS2812B |
WS2812B::show |
Pushes the color data out to the LEDs |
WS2812B::clear |
Clear the memory |
WS2812B::setLEDCount |
Allocate memory for all the LEDs |
WS2812B::setPixelColor |
Set the color of a LED |
WS2812B::fill |
Set multiple LEDs with the same color |
WS2812B::colorHSV |
Convert to RGB values from HSV |
WS2812B::rainbow |
Fill all the LEDs with one or more cycle of hues |
- WS2812B::WS2812B
Description
Constructs a WS2812B object
Syntax
WS2812B::WS2812(uint8_t input_pin, uint16_t num_leds)
Parameters
input_pin : The MOSI pin that is connected to the WS2812B LED.
num_leds : The number of LEDs that needs to be light up
Returns
The function returns nothing
Example Code
Example: WS2812B_Basics; WS2812B_Patterns
Notes and Warnings
Only SPI MOSI pin is valid for driving WS2812B LEDs.
- WS2812B::begin
Description
Check for correct pin settings and prepare to drive the WS2812B
Syntax
void WS2812B::begin(void)
Parameters
This function does not require any input parameters
Returns
The function returns nothing
Example Code
Example: WS2812B_Basics; WS2812B_Patterns
Notes and Warnings
NA
- WS2812B::show
Description
Pushes the color data out to the LEDs
Syntax
void WS2812B::show(void)
Parameters
This function does not require any input parameters
Returns
The function returns nothing
Example Code
Example: WS2812B_Basics; WS2812B_Patterns
Notes and Warnings
The amount of time needed to push the color data will increase with more LEDs.
- WS2812B::clear
Description
Clear the memory
Syntax
void WS2812B::clear(void)
Parameters
This function does not require any input parameters
Returns
The function returns nothing
Example Code
Example: WS2812B_Patterns
Notes and Warnings
This function only clears the color data from memory. To turn off the
LED, please use WS2812B::show().
- WS2812B::setLEDCount
Description
Allocate memory for all the LEDs
Syntax
void WS2812B::setLEDCount(uint16_t num_leds)
Parameters
This function does not require any input parameters
Returns
The function returns nothing
Example Code
NA
Notes and Warnings
NA
- WS2812B::setPixelColor
Description
Set the color of a LED
Syntax
void WS2812B::setPixelColor(uint16_t led_Number, uint8_t rColor, uint8_t gColor, uint8_t bColor)
Parameters
Led_Number : The LED number, with 0 being the LED closest to the data
input pin
rColor : Red brightness level, from 0 (Off) – 255 (Maximum brightness)
gColor : Green brightness level, from 0 (Off) – 255 (Maximum brightness)
bColor : Blue brightness level, from 0 (Off) – 255 (Maximum brightness)
Returns
The function returns nothing
Example Code
Example: WS2812B_Basics; WS2812B_Patterns
Notes and Warnings
NA
- WS2812B::fill
Description
Set multiple LEDs with the same colors
Syntax
WS2812B::fill(uint8_t rColor, uint8_t gColor, uint8_t bColor, uint16_t first, uint16_t count)
Parameters
rColor : Red brightness level, from 0 (Off) – 255 (Maximum brightness)
gColor : Green brightness level, from 0 (Off) – 255 (Maximum brightness)
bColor : Blue brightness level, from 0 (Off) – 255 (Maximum brightness)
first : The index of the first LED to start filling with color
count : Total number of LEDs to be set with the color
Returns
The function returns nothing
Example Code
Example: WS2812B_Basics
Notes and Warnings
If the first and count is not provided, the default behaviour would be to fill all LEDs.
- WS2812B::colorHSV
Description
Convert to RGB values from HSV
Syntax
uint32_t colorHSV(uint16_t hue, uint8_t sat, uint8_t val);
Parameters
hue : Expressed as 16-bit number. Starting from 0 for red, it increments
first towards yellow, and on through green, cyan, blue, magenta, and
black to red.
sat : Intensity or purity of the color. Expressed as 8-bit number ranging
from 0 to 255. In the middle, you will get something sort of pastel.
val : Brightness of a color. Expressed as an 8-bit number ranging from 0
to 255.
Returns
The function returns the RGB values converted from HSV.
Example Code
Example: WS2812B_Patterns
Notes and Warnings
NA
- WS2812B::rainbow
Description
Fill all the LEDs with one or more cycle of hues
Syntax
void rainbow(uint16_t first_hue = 0, int8_t reps = 1, uint8_t saturation = 255, uint8_t brightness = 60);
Parameters
first_hue : hue of first LED, 0 – 65535, representing one full cycle of
the color wheel.
reps : Number of cycles of the color wheel over the length of the strip.
Default is 1. Negative values can be used to reverse the hue order.
saturation : Intensity or purity of the color. Expressed as 8-bit number
ranging from 0 to 255. In the middle, you will get something sort of
pastel.
brightness : Brightness of a color. Expressed as an 8-bit number ranging
from 0 to 255.
Returns
The function returns nothing
Example Code
Example: WS2812B_Patterns
Notes and Warnings
NA