Class AmebaILI9341
Description
Defines a class to use ILI9341 TFT SPI display for Ameba.
Syntax
class AmebaILI9341
Members
Public Constructors |
|
---|---|
AmebaILI9341::AmebaILI9341 |
Constructs an AmebaILI9341 object |
Public Methods |
|
AmebaILI9341::begin |
Initialize SPI, pin mapping and screen configuration |
AmebaILI9341::setAddress |
Initialize image size and position |
AmebaILI9341::writecommand |
SPI transfer a command |
AmebaILI9341::writedata |
SPI transfer a piece of data |
AmebaILI9341::setRotation |
Set screen orientation |
AmebaILI9341::fillScreen |
Fill the screen with a color |
AmebaILI9341::clr |
Clear screen |
AmebaILI9341::fillRectangle |
Fill a rectangular space with a color |
AmebaILI9341::drawPixel |
Turn on a pixel on the screen |
AmebaILI9341::drawChar |
To print a character on the screen |
AmebaILI9341::drawLine |
Draw line on the screen |
AmebaILI9341::drawRectangle |
Draw a rectangle on the screen |
AmebaILI9341::drawCircle |
Draw a circle on the screen |
AmebaILI9341::write |
Same as drawChar |
AmebaILI9341::getWidth |
Return the width 240 |
AmebaILI9341::getHeight |
Return the height 320 |
AmebaILI9341::setCursor |
Set cursor to the desired position |
AmebaILI9341::setForeground |
Set foreground color |
AmebaILI9341::setBackground |
Set background color |
AmebaILI9341::setFontSize |
Set character font size |
AmebaILI9341::reset |
Reset pin to High or Low |
- AmebaILI9341::AmebaILI9341
Description
Constructs an AmebaILI9341 object and set CS, DC and RESET pins .
Syntax
AmebaILI9341::AmebaILI9341(int csPin, int dcPin, int resetPin)
Parameters
csPin
: pin for Chip Select
dcPin
: pin for Data/Command
resetPin
: pin for Reset
Returns
The function returns nothing.
Example Code
Example: : PM25_ON_ILI9341_TFT_LCD
This example demonstrates how to read pm2.5 value on PMS 3003 air-condition sensor and display it on ILI9341 TFT LCD.
/*
PMS 3003 pin map is as follow:
PIN1 :VCC, connect to 5V
PIN2 :GND
PIN3 :SET, 0:Standby mode, 1:operating mode
PIN4 :RXD :Serial RX
PIN5 :TXD :Serial TX
PIN6 :RESET
PIN7 :NC
PIN8 :NC
In this example, we only use Serial to get PM 2.5 value.
The circuit:
* RX is digital pin 0 (connect to TX of PMS 3003)
* TX is digital pin 1 (connect to RX of PMS 3003)
For RTL8195A ILI9341 TFT LCD with SPI interface has these pins:
D/C : connect to pin 9
CS : connect to pin 10
MOSI : connect to pin 11
MISO : connect to pin 12
CLK : connect to pin 13
VCC : connect to 3V3
GND : connect to GND
*/
#include "SoftwareSerial.h"
#include "SPI.h"
#include "AmebaILI9341.h"
#if defined(BOARD_RTL8195A)
SoftwareSerial mySerial(0, 1); // RX, TX
#define TFT_RESET 8
#define TFT_DC 9
#define TFT_CS 10
#elif defined(BOARD_RTL8710)
SoftwareSerial mySerial(17, 5); // RX, TX
// IMPORTANT: Due to limit pin, we do not connect TFT_RESET pin.
#define TFT_RESET 0xFFFFFFFF
#define TFT_DC 2
#define TFT_CS 10
#endif
AmebaILI9341 tft = AmebaILI9341(TFT_CS, TFT_DC, TFT_RESET);
#define ILI9341_SPI_FREQUENCY 20000000
#define pmsDataLen 32
uint8_t buf[pmsDataLen];
int idx = 0;
int pm10 = 0;
int last_pm25 = 0;
int pm25 = 0;
int pm100 = 0;
uint16_t pm25color[] = {
0x9FF3,
0x37E0,
0x3660,
0xFFE0,
0xFE60,
0xFCC0,
0xFB2C,
0xF800,
0x9800,
0xC99F
};
void setup() {
Serial.begin(57600);
mySerial.begin(9600); // PMS 3003 UART has baud rate 9600
SPI.setDefaultFrequency(ILI9341_SPI_FREQUENCY);
tft.begin();
drawPictureFrames();
}
void loop() { // run over and over
uint8_t c;
idx = 0;
memset(buf, 0, pmsDataLen);
while (true) {
while (c != 0x42) {
while (!mySerial.available());
c = mySerial.read();
}
while (!mySerial.available());
c = mySerial.read();
if (c == 0x4d) {
// now we got a correct header)
buf[idx++] = 0x42;
buf[idx++] = 0x4d;
break;
}
}
while (idx != pmsDataLen) {
while(!mySerial.available());
buf[idx++] = mySerial.read();
}
pm10 = ( buf[10] << 8 ) | buf[11];
last_pm25 = pm25;
pm25 = ( buf[12] << 8 ) | buf[13];
pm100 = ( buf[14] << 8 ) | buf[15];
updateValueToTftScreen();
}
void drawPictureFrames() {
tft.setRotation(1);
tft.clr();
tft.setFontSize(1);
// Upper title
tft.setFontSize(1);
tft.setCursor(20,20);
tft.print("PM2.5 DETECTOR");
// PM 2.5 Circle Frame
tft.drawCircle(100,130,60, ILI9341_BLUE);
tft.drawCircle(100,130,61, ILI9341_BLUE);
tft.setFontSize(1);
tft.setCursor(90,85);
tft.print("PM2.5");
tft.setFontSize(1);
tft.setCursor(90,170);
tft.print("um/m3");
// PM 10 Circle Frame
tft.drawCircle(220,70,40, ILI9341_BLUE);
tft.setFontSize(1);
tft.setCursor(210,40);
tft.print("PM10");
tft.setFontSize(1);
tft.setCursor(205,95);
tft.print("um/m3");
// PM 1.0 Circle Frame
tft.drawCircle(220,170,40, ILI9341_BLUE);
tft.setFontSize(1);
tft.setCursor(205,140);
tft.print("PM1.0");
tft.setFontSize(1);
tft.setCursor(205,195);
tft.print("um/m3");
// right side bar, referenced from: http://taqm.epa.gov.tw/taqm/tw/
tft.fillRectangle(290, 30+ 0*2, 10, 12*2, pm25color[0]); // 0~11
tft.fillRectangle(290, 30+12*2, 10, 12*2, pm25color[1]); // 12-23
tft.fillRectangle(290, 30+24*2, 10, 12*2, pm25color[2]); // 24-35
tft.fillRectangle(290, 30+36*2, 10, 6*2, pm25color[3]); // 36-41
tft.fillRectangle(290, 30+42*2, 10, 6*2, pm25color[4]); // 42-47
tft.fillRectangle(290, 30+48*2, 10, 6*2, pm25color[5]); // 48-53
tft.fillRectangle(290, 30+54*2, 10, 6*2, pm25color[6]); // 54-58
tft.fillRectangle(290, 30+59*2, 10, 6*2, pm25color[7]); // 59-64
tft.fillRectangle(290, 30+65*2, 10, 6*2, pm25color[8]); // 65-70
tft.fillRectangle(290, 30+71*2, 10, 10*2, pm25color[9]); // >=71
tft.setCursor(302, 30);
tft.setFontSize(1);
tft.print("0");
tft.setCursor(302, 30+36*2);
tft.print("36");
tft.setCursor(302, 30+54*2);
tft.print("54");
tft.setCursor(302, 30+71*2);
tft.print("71");
// bottom right text
tft.setCursor(210,230);
tft.setFontSize(1);
tft.print("Powered by Realtek");
updateValueToTftScreen();
}
void updateValueToTftScreen() {
tft.setCursor(60, 111);
tft.setFontSize(5);
tft.setForeground( getPm25Color(pm25) );
if (pm25 < 10) {
tft.print(" ");
} else if (pm25 < 100) {
tft.print(" ");
}
tft.print(pm25);
tft.setCursor(195,60);
tft.setFontSize(3);
if (pm100 < 10) {
tft.print(" ");
} else if (pm100 < 100) {
tft.print(" ");
}
tft.print(pm100);
tft.setCursor(198,160);
if (pm10 < 10) {
tft.print(" ");
} else if (pm10 < 100) {
tft.print(" ");
}
tft.print(pm10);
tft.setFontSize(1);
tft.setForeground(ILI9341_WHITE);
if (last_pm25 > 80) {
tft.fillRectangle(275, 80*2+30-3, 12, 8, ILI9341_BLACK);
} else {
tft.fillRectangle(275, last_pm25*2+30-3, 12, 8, ILI9341_BLACK);
}
if (pm25 > 80) {
tft.setCursor(275, 80*2+30-3);
} else {
tft.setCursor(275, pm25*2+30-3);
}
tft.print("=>");
}
uint16_t getPm25Color(int v) {
if (v < 12) {
return pm25color[0];
} else if (v < 24) {
return pm25color[1];
} else if (v < 36) {
return pm25color[2];
} else if (v < 42) {
return pm25color[3];
} else if (v < 48) {
return pm25color[4];
} else if (v < 54) {
return pm25color[5];
} else if (v < 59) {
return pm25color[6];
} else if (v < 65) {
return pm25color[7];
} else if (v < 71) {
return pm25color[8];
} else {
return pm25color[9];
}
}
Notes and Warnings
NA
- AmebaILI9341::begin
Description
Initialize hardware SPI, pin mapping and screen configuration
Syntax
void AmebaILI9341::begin(void)
Parameters
The function requires no input parameter.
Returns
The function returns nothing.
Example Code
Example: PM25_ON_ILI9341_TFT_LCD
Details of the code are given in the previous section of AmebaILI9341:: AmebaILI9341.
Notes and Warnings
This method is required to run first before other operations on the display.
- AmebaILI9341::setAddress
Description
Initialize image size and positioning on the display
Syntax
void AmebaILI9341::setAddress(uint16_t x0, uint16_t y0, uint16_t x1,uint16_t y1)
Parameters
x0
: leftmost coordinate of the image y0: top coordinate of the image x1:
rightmost coordinate of the image y1: bottom coordinate of the image
Returns
The function returns nothing.
Example Code
NA
Notes and Warnings
Do not use this to set the cursor, use the “setCursor” method instead.
- AmebaILI9341::writecommand
Description
Write a single-byte command to display
Syntax
void AmebaILI9341::writecommand(uint8_t command)
Parameters
command
: a single byte command
Returns
The function returns nothing.
Example Code
NA
Notes and Warnings
NA
- AmebaILI9341::writedata
Description
Write 1 byte of data to display
Syntax
void AmebaILI9341::writedata(uint8_t data)
Parameters
data
: 1 byte data
Returns
The function returns nothing.
Example Code
NA
Notes and Warnings
Only use this method to write 1 byte at a time.
- AmebaILI9341::setRotation
Description
Setting screen orientation, “0” for no rotation, “1” for 90 degrees rotation and so on so forth.
Syntax
void AmebaILI9341::setRotation(uint8_t m)/span>
Parameters
m
: one of the 4 rotation modes -> “0” for no rotation, “1” for 90⁰, “2”
for 180⁰, “3” for 270⁰
Returns
The function returns nothing.
Example Code
Example: PM25_ON_ILI9341_TFT_LCD
Details of the code are given in the previous section of AmebaILI9341:: AmebaILI9341.
Notes and Warnings
if m=4, it’s equivalent to mode 0, and m=5 for mode 1, m=6 for mode 2 so on so forth.
- AmebaILI9341::fillScreen
Description
Fill the entire screen with one color
Syntax
void AmebaILI9341::fillScreen(uint16_t color)
Parameters
color
: a 16-bit color reference defined in AmebaILI9341.h
Returns
The function returns nothing.
Example Code
NA
Notes and Warnings
Refer to AmebaILI9341.h for available colors.
- AmebaILI9341::clr
Description
Fill the entire screen with a certain background-color
Syntax
void AmebaILI9341::clr(void)
Parameters
The function requires no input parameter.
Returns
The function returns nothing.
Example Code
Example: PM25_ON_ILI9341_TFT_LCD
Details of the code are given in the previous section of AmebaILI9341:: AmebaILI9341
Notes and Warnings
background-color can be set by calling setBackground method.
- AmebaILI9341::fillRectangle
Description
Fill a rectangular space with a color on the screen
Syntax
void AmebaILI9341::fillRectangle(int16_t x, int16_t y, int16_t w,int16_t h, uint16_t color)
Parameters
x
: leftmost coordinate of the image
y
: top coordinate of the image
w
: width of the image
h
: height of the image
color
: the color of the image
Returns
The function returns nothing.
Example Code
Example: PM25_ON_ILI9341_TFT_LCD
Details of the code are given in the previous section of AmebaILI9341:: AmebaILI9341.
Notes and Warnings
NA
- AmebaILI9341::drawPixel
Description
Turn on a pixel on the screen
Syntax
void AmebaILI9341::drawPixel(int16_t x, int16_t y, uint16_t color)
Parameters
x
: leftmost coordinate of the image
y
: top coordinate of the image
color
: the color of the image
Returns
The function returns nothing.
Example Code
NA
Notes and Warnings
NA
- AmebaILI9341::drawChar
Description
Draw character on the screen
Syntax
void AmebaILI9341::drawChar(unsigned char c) void
AmebaILI9341::drawChar(int16_t x, int16_t y, unsigned char c, uint16_t
_fontcolor, uint16_t _background, uint8_t _fontsize)
Parameters
x
: leftmost coordinate of the image
y
: top coordinate of the image
c
: a character
_fontcolor
: font color
_background
: background color
_fontsize
: font size
Returns
The function returns nothing.
Example Code
NA
Notes and Warnings
In the actual example, the Print method is used to print a string of character on the screen instead of using this method.
- AmebaILI9341::drawLine
Description
Draw a straight line on the screen
Syntax
void AmebaILI9341::drawLine(int16_t x0, int16_t y0, int16_t x1, int16_t
y1) void AmebaILI9341::drawLine(int16_t x0, int16_t y0, int16_t x1,
int16_t y1, uint16_t color)
Parameters
x0
: leftmost coordinate of the image
y0
: top coordinate of the image
x1
: leftmost coordinate of the image
y1
: top coordinate of the image
color
: the color of the image
Returns
The function returns nothing.
Example Code
NA
Notes and Warnings
NA
- AmebaILI9341::drawRectangle
Description
Draw a rectangular shape on the screen
Syntax
void AmebaILI9341::drawRectangle(int16_t x, int16_t y, int16_t w,
int16_t h) void AmebaILI9341::drawRectangle(int16_t x, int16_t y,
int16_t w, int16_t h, uint16_t color)
Parameters
x
: leftmost coordinate of the image
y
: top coordinate of the image
w
: width of the image
h
: height of the image
color
: the color of the image
Returns
The function returns nothing.
Example Code
NA
Notes and Warnings
NA
- AmebaILI9341::drawCircle
Description
Draw a circular shape on the screen
Syntax
void AmebaILI9341::drawCircle(int16_t x0, int16_t y0, int16_t r) void
AmebaILI9341::drawCircle(int16_t x0, int16_t y0, int16_t r, uint16_t
color)
Parameters
x0
: leftmost coordinate of the image
y0
: top coordinate of the image
r
: radius of the image
color
: the color of the image
Returns
The function returns nothing.
Example Code
NA
Notes and Warnings
Include “AmebaServo.h” to use the class function.
- AmebaILI9341::write
Description
Same as drawChar, write a character on the screen
Syntax
size_t AmebaILI9341::write(uint8_t c)
Parameters
c
: a character to be written on the screen
Returns
Number of bytes written
Example Code
NA
Notes and Warnings
This an inherited method from Print class and is seldom used.
- AmebaILI9341::getWidth
Description
Get the width of the image
Syntax
int16_t AmebaILI9341::getWidth(void)
Parameters
The function requires no input parameter.
Returns
Width of the image
Example Code
NA
Notes and Warnings
NA
- AmebaILI9341::getHeight
Description
Get the height of the image
Syntax
int16_t AmebaILI9341::getHeight(void)
Parameters
The function requires no input parameter.
Returns
Height of the image
Example Code
NA
Notes and Warnings
NA
- AmebaILI9341::setCursor
Description
Set the cursor to a specific position on the screen
Syntax
void AmebaILI9341::setCursor(int16_t x, int16_t y)
Parameters
x
: coordinate on the x-axis
y
: coordinate on the y-axis
Returns
The function returns nothing.
Example Code
Example: PM25_ON_ILI9341_TFT_LCD
Details of the code are given in the previous section of AmebaILI9341:: AmebaILI9341.
Notes and Warnings
NA
- AmebaILI9341::setForeground
Description
Set foreground color
Syntax
void AmebaILI9341::setForeground(uint16_t color)
Parameters
color
: one of the colors available in AmebaILI9341.h
Returns
The function returns nothing.
Example Code
Example: PM25_ON_ILI9341_TFT_LCD
Details of the code are given in the previous section of AmebaILI9341:: AmebaILI9341.
Notes and Warnings
NA
- AmebaILI9341::setBackground
Description
Set background color
Syntax
void AmebaILI9341::setBackground(uint16_t _background)
Parameters
_background
: one of the colors available in AmebaILI9341.h
Returns
The function returns nothing.
Example Code
Example: PM25_ON_ILI9341_TFT_LCD
Details of the code are given in the previous section of AmebaILI9341:: AmebaILI9341.
Notes and Warnings
NA
- AmebaILI9341::setFontSize
Description
Set the font size of the characters printed on the screen.
Syntax
void AmebaILI9341::setFontSize(uint8_t size)
Parameters
size
: font size default 1 for smallest, 5 for largest font size
Returns
The function returns nothing.
Example Code
Example: PM25_ON_ILI9341_TFT_LCD
Details of the code are given in the previous section of AmebaILI9341:: AmebaILI9341.
Notes and Warnings
NA
- AmebaILI9341::reset
Description
Reset the pin to High or Low
Syntax
void AmebaILI9341::reset(void)
Parameters
The function requires no input parameter.
Returns
The function returns nothing.
Example Code
NA
Notes and Warnings
NA