HTTP - Retrieve HTTP websites from the Internet
AmebaD [AMB21 / AMB22 / AMB23 / BW16] x 1
In this example, the HttpClient library is used to retrieve a webpage
using the HTTP protocol.
First, make sure that the correct Ameba development board is selected
in “Tools” → “Board”
“File” → “Examples” → “AmebaHttp” → “SimpleHttpExample”
In the sample code, modify the highlighted section to enter the information required (ssid, password, key index) to connect to your WiFi network.
Upload the code and press the reset button on Ameba once the upload is finished. Open the serial monitor in the Arduino IDE and you can see the information retrieved from the website.
WiFi.begin() to establish WiFi connection:
To get the information of a WiFi connection:
WiFi.SSID() to get SSID of the current connected network.
WiFi.RSSI() to get the signal strength of the connection.
WiFi.localIP() to get the IP address of Ameba.
Use WiFiClient to create a client to handle the WiFi connection. https://www.arduino.cc/en/Reference/WiFiClient
Use HTTPClient to create a client to handle the HTTP connection.
http.get() to send a GET request to the website.