Basic Examples

AMB23 (RTL8722DM_MINI) Supported ARDUINO built-in example table

There are many built-in examples in Arduino. In the table below, we list all examples that are compatible with Ameba.

Please refer to the following link to set up Ameba for Arduino IDE.

https://www.amebaiot.com/en/amebad-mini-arduino-getting-started/

Please refer to the following link for Arduino built-in example details.

https://www.arduino.cc/en/Tutorial/BuiltInExamples//

Category	Name	Comment	Remarks
01. Basics	AnalogRead Serial	Connect potentiometer to 3.3V.	ADC pin options A0, A1, A2, A3, A4, A5 and A6. ADC pin reading voltage range 0 to 3.3V.
	Bare Minimum
	Blink	Pin LED_BUILTIN sets to LED_B	Onboard LEDs options LED_B and LED_G. (blue and green)
	DigitalRead Serial		Onboard button PUSH_BTN.
	Fade	Replace “led = 9;” by a PWM pin (D4, D5, D7, D12, D13, D14, D17, D20, or D21). e.g. “led = 4;”
	ReadAnalog Voltage		ADC pin options A0, A1, A2, A3, A4, A5 and A6. ADC pin reading voltage range 0 to 3.3V.
02. Digital	BlinkWitout Delay	The onboard blue LED (LED_B) has been used.	Onboard LEDs options LED_G.
	Button		Onboard LEDs options LED_B and LED_G. Onboard button PUSH_BTN.
	Debounce		Onboard LEDs options LED_B and LED_G. Onboard button PUSH_BTN.
	DigitalInput Pullup		Onboard LEDs options LED_B and LED_G.
	StateChange Detection		Onboard LEDs options LED_B and LED_G. Onboard button PUSH_BTN.
	toneKeyboard	Replace “tone(8, notes[thisSensor], 20);” by a PWM pin (D4, D5, D7, D12, D13, D14, D17, D20, or D21). e.g. “tone(21, notes[thisSensor], 20);”
	toneMelody
	tone Multiple
	tonePitch Follower
03. Analog	AnalogIn OutSerial	Replace “analogOutPin = 9;” by a PWM pin (D4, D5, D7, D12, D13, D14, D17, D20, or D21). e.g. “analogOutPin = 4;”	ADC pin options A0, A1, A2, A3, A4, A5 and A6. ADC pin reading voltage range 0 to 3.3V.
	AnalogInput		Onboard LEDs options LED_B and LED_G. ADC pin reading voltage range 0 to 3.3V.
	Analog Write Mega	Use PWM pins D4, D5, D7, D12, D13, D14, D17, D20, or D21.
	Calibration		Onboard LEDs options LED_B and LED_G. Onboard button PUSH_BTN. ADC pin options A0, A1, A2, A3, A4, A5 and A6. ADC pin reading voltage range 0 to 3.3V.
	Fading	Replace “ledPin = 9;” by a PWM pin (D4, D5, D7, D12, D13, D14, D17, D20, or D21). e.g. “ledPin = 4;”
	Smoothing		ADC pin options A0, A1, A2, A3, A4, A5 and A6. ADC pin reading voltage range 0 to 3.3V.
04. Communication	ASCIITable
	Dimmer		Onboard LEDs options LED_B and LED_G.
	Graph	Connect potentiometer to 3.3V.	ADC pin options A0, A1, A2, A3, A4, A5 and A6. ADC pin reading voltage range 0 to 3.3V.
	Midi	Use Serial1 and pin D18, or use Serial2 and pin D1.
	MultiSerial
	Physical Pixel		Onboard LEDs options LED_B and LED_G.
	ReadASCII String	Use PWM pin for LED (D4, D5, D7, D12, D13, D14, D17, D20, or D21).
	SerialCall Response		ADC pin options A0, A1, A2, A3, A4, A5 and A6. ADC pin reading voltage range 0 to 3.3V.
	Serial CallResponse ASCII		ADC pin options A0, A1, A2, A3, A4, A5 and A6. ADC pin reading voltage range 0 to 3.3V.
	SerialEvent
	SerialPa ssthrough		Serial options, Serial1 or Serial2.
	VirtualColor Mixer		ADC pin options A0, A1, A2, A3, A4, A5 and A6. ADC pin reading voltage range 0 to 3.3V.
05. Control	Arrays	Use pins D1, D2, D3, D4, D5, D6.
	ForLoop Iteration	Use pins D1, D2, D3, D4, D5, D6.
	IfStatement Conditional		ADC pin options A0, A1, A2, A3, A4, A5 and A6. ADC pin reading voltage range 0 to 3.3V. Onboard LEDs options LED_B and LED_G.
	switchCase		ADC pin options A0, A1, A2, A3, A4, A5 and A6. ADC pin reading voltage range 0 to 3.3V.
	switchCase2	Use pins D1, D2, D3, D4, D5, D6.
	WhileStatement Conditional	Replace “ledPin = 9;” by a PWM pin (D4, D5, D7, D12, D13, D14, D17, D20, or D21). e.g. “ledPin = 4;”	ADC pin options A0, A1, A2, A3, A4, A5 and A6. ADC pin reading voltage range 0 to 3.3V.
06. Display	barGraph		ADC pin options A0, A1, A2, A3, A4, A5 and A6. ADC pin reading voltage range 0 to 3.3V.
	RowColumn Scanning		ADC pin options A0, A1, A2, A3, A4, A5 and A6. ADC pin reading voltage range 0 to 3.3V.
07. Strings	Character Analysis
	String Addition Operator
	String Append Operator
	StringCase Changes
	String Characters
	String Comparison Operators		ADC pin options A0, A1, A2, A3, A4, A5 and A6. ADC pin reading voltage range 0 to 3.3V.
	String IndexOf
	String Length
	StringLength Trim
	String Replace
	String StartsWith EndsWith
	String Substring
	String ToInt